What Does “Local Channels Not Working” Mean Exactly?

There are a few different issues that could occur when someone says their DirecTV local channels aren’t working properly:

– No signal at all – The local channel may just show a black or blue screen. This usually indicates a reception issue with your dish setup.

– Pixelated, distorted picture – The video comes through but is full of visual artifacts like pixelation, distorted shapes and colors. This can signify a weak signal.

– Guide shows channel but video won’t play – The channel logo and info shows normally on the guide, but when you select the channel it doesn’t load any video. Typically a device connectivity problem.

So first you need to observe carefully what the actual symptom is when you try tuning to a local channel that “isn’t working.” That will guide your next troubleshooting steps.

Check Your DirecTV Internet Connection

Many of DirecTV’s features including access to local channels require an internet connection. If you previously had local channels working then suddenly lost reception, check that your DirecTV box and dish still have a solid broadband connection. Reset modems and routers if needed, or call your ISP if the internet is out entirely. This could immediately restore missing local channel functionality while you investigate other issues.

Inspect Cable Connections to TVs and Receivers

Loose HDMI or coaxial cables are one of the most common causes of DirecTV problems, including losing access to local channels. Verify that every cable connecting your dish, switch or splitter, DVRs and receivers, and TVs themselves are inserted snugly. Tighten any loose connections and replace any damaged cables if necessary. Check behind your hardware too for any unplugged cords you may have missed. Solid cable connectivity facilitates better channel signal transfer.

Check DirecTV Receiver Signal Strength

Your receiver box processes signals from your dish to decode local and other channels beamed to your home. If signal strength reaching the box is too low due to dish alignment problems, local channels may cut out. Access signal strength info by going to Menu > Settings > Info & Test > More System Info on older DirecTV boxes. HD receivers display dish signal meters on Menu > Settings & Help > Settings > Info & Test. Aim for at least 70% and no more than 105% signal for reliable local channel functionality.

Realign Your DirecTV Satellite Dish

Misalignment of your dish happens gradually over time due to weather events, light pole shifts, housing settling, and other factors. If your local ABC, CBS, NBC or Fox channels are unwatchable or lost altogether, realigning the dish can get them back. Refer to DirecTV support for proper realignment steps based on your setup. Essentially you’ll tilt, rotate, and shift the dish while monitoring signal strength readings until optimal alignment with DirecTV satellites is achieved. Then re-scan channels from the receiver menu.

Check Local Channel Availability for Your Area

While rare today, certain zip codes still don’t have access to some local DirecTV channels due to licensing restrictions. And if you recently moved homes, the local channel availability likely changed and requires updating your receiver location access settings before tuning eligibility resets. If missing channels were once available but now aren’t, double check that your local channel lineup is valid. Compare with the Local Channel Lists on DirecTV’s site or the receiver guide to verify which local stations should show based on your physical address.

Reset Your DirecTV Box and Restart Your TV

As with most electronics, occasionally a basic device reset clears up DirecTV issues like missing local channels, frozen screens, laggy guides, and more. First unplug the power cord from both the receiver itself and your television to fully cut electricity. Wait 20 seconds before plugging both back in and powering on your TV and receiver. If the boxes were just stuck, this refresh often fixes problems accessing local channel video and info. Slow internet connectivity mentioned earlier can also cause boxes to lock up over time.

Call DirecTV Support for Additional Troubleshooting

Even after trying the above tips, some homes encounter stubborn local channel functionality problems due to equipment failures, wiring complexities, trees/buildings blocking signals, and other issues specific to each location. If you cannot restore your local ABC, CBS, NBC and Fox channels, it’s time to call the experts. The DirecTV technical support team can analyze your setup, signal readings, account status, and troubleshooting steps already attempted to isolate the problem and clearly explain how to regain access to critical local broadcasts.

Stay Calm and Keep Testing

Losing easy access to important local news, weather, and network TV shows can certainly be stressful and inconvenient. But calmly and systematically running through the troubleshooting solutions above will help narrow down exactly why your DirecTV local channels stopped working properly. In many cases it ends up being a quick fix. Record your observations of channel issues, signal readings, connections checked, and other details which support agents can utilize to speed up restoration of your complete channel lineup. With patience and persistence, you’ll likely have your local ABC, CBS, Fox, and NBC programs streaming again shortly.

The post Troubleshooting DirecTV Local Channels Not Working appeared first on Stream TV Better.

Signal-related issues are commonly represented by the DirecTV error code 721.

In this post, I am going to share the troubleshooting tips to fix the Blue screen on DirecTV. When your TV screen suddenly changes to Blue, Black, or Grey colored without the DirecTV logo or screensaver, then apply the tricks to fix the error.

This could happen when you turn on the TV and receiver ox, or even during watching your favorite shows.

The Bluescreen on DirecTV is due to the signal problem. seems like error code 771 happened. Signals from the dish antenna cannot be received on the receiver. In order to fix the issue, you should check all the connections made between the dish antenna and the receiver box. If there is very poor signal strength, it’ll happen.

This type of error is commonly seen in DirecTV satellites but not in streaming services. In addition to troubleshooting the issue with the TV and the receiver box, we should do some additional methods to strengthen the signal quality.

How To Fix DirecTV Signal Loss?

When it feels any kind of signal issue like Error code 771, You may not get any picture or sound when it happens. follow the troubleshooting tips. You’ll get notified with a DirecTV error code 721 when the channel is not in the package you subscribed.

Method 1:- Info Method

Point your Genie remote to your receiver/TV and press the INFO button. This could fix very minor signal problems.

Check for any pop-up messages on the top of the screen like below

Check when the programs air or Refresh your service

If you get any of the given messages, then thank god. You can simply fix the error.

When you get a message saying Check when the programs air, you don’t need to do anything. Instead, wait for a few minutes, the program will automatically start playing.

This type of error occurs when the programs already aired or haven’t started.

Not started programs after a few minutes, then you could refresh your DVD receiver box.

Method 2:- Reset your Receiver

It’s a very quick method. The only thing you need to do is just press the RED color reset button on the receiver box. Most probably, when the issue with the receiver is, the DirecTV Blue screen will be solved.

Method 3:- Check TV Inputs (Cycle Through)

First of all, Turn off your TV and the receiver. Then turn it ON.

Then cycle through your TV inputs. For this, press and hold down the Enter button on the Genie remote control until you see the picture on display. This is what we called the TV input cycle.

When you are using a universal remote, press and hold the TV input button for a few seconds to get the inputs checked.

If nothing happened, then you should re-program DirecTV remote to your TV control and try again.

The connection issue is also an important reason for having the DirecTV error 775 message. The main reason for the 775 code is that the communication between the receiver and the Dish antenna has been lost. So, these troubleshooting tips can also be applicable even when you experience Error code 775 shown on your TV screen.

Method 3:- Check all the cable connections

You should check if all the connections are made properly. You should check the HDMI ports, connection, and check cables.

Sometimes, when the cables are in prolonged usage, they may be got damaged. It can’t deliver quality signals received from the dish antenna. In such a case, you should replace them.

Have any spare cable, then it’s easy for you to test whether there is any issue with the cable used in the connections.

Method 4:- Reboot the Receiver box

Before rebooting the box, you should check whether the access card is properly inserted into the card door. If it is loosely connected, or any misplacement, then you should insert it in the right way. If not in the correct position, DirecTV flickering will happen.

If the screen of death issue still persists, then reboot the box.

For this, unplug the power cord from the power outlet.

Wait for 15 seconds, and plug it in.

Then turn on the power switch, and press the power button on the box to reboot.

If none of them couldn’t help you. Connect to the DirecTV satellite department customer support team.

How to strengthen the DirecTV signal?

Loss of signal or poor signal strength can be fixed by doing common things like

Remove any obstacles around the dish

We should make the circumstances where the whole signal from the satellite should be getting on the surface of the dish antenna and make sure that the LNB receives it. So, if there are any obstacles that cover the surface of the antenna should be removed.

Cut any tree limbs are there grow over the dish antenna surface.

Replace coaxial cable

When your coaxial cable used for the connection between the receiver and the dish is in prolonged use, it’s better to replace it with a new cable. Over time, it losses its ability to carry the signal and provide poor output. This will cause partial or overall signal quality loss.

Providing high-quality and branded coaxial cable will improve signal quality.

Consider replacing the old receiver box

When you are getting the error message 721 frequently, your receiver needs to be replaced. If the current receiver is in use for a long time, you can just contact the dealer to replace the box with a new one.

Conclusion

In most cases, the errors related to the DirecTV signals will be solved by the following troubleshooting tips. All these can be applied by yourself.

If bad weather is out, just be patient till the sky is clear. Also, make sure there are no obstacles around the dish that could interrupt the signal propagation to the receiver.

Have any idea to troubleshoot the Blue screen error and succeeded by you. You can share the tips here. I’ll definitely add to the article. And let help others who were experiencing the same kind of errors.

Read More from my blog

• How to reset a DirecTV remote control?

The post Fixing Blue Screen Issues on DirecTV: Signal Loss Error Code 771 Solution appeared first on Stream TV Better.

In this post, we are going to look at the common causes and the troubleshooting tips to solve the problem. If you are experiencing the same kind of errors, definitely this post will helpful for you.

Why Is My Frndly TV Keeps Buffering?

The buffering issue on Frndly TV is due to the slow network speed or the multiple numbers of network users. You should also check whether the data pack has expired or not. You can’t access the content when the FrndlyTV pack has expired. So, check all other factors

How to Fix Frndly TV buffering issue?

Frndly TV provides 40+ channels under various categories for a very affordable price. In order to enjoy all of them without any buffering or cutting-out issue, try the following troubleshooting tips.

Check your Internet speed

For smooth and buffer-free streaming on Frndly TV, you should provide 1.5 Mbps downloading speed for SD content and 5 Mbps downloading speed for SD content streaming.

So, check the internet speed and it provides sufficient speed.

You can check the speed online. For this, go to the following link

Test your internet speed online

Check Internet speed online, and click on the Run Speed Test button.

If it shows the download speed minimum of 5 Mbps, there is no issue with the WiFi. If the speed is very low, contact the broadband providers.

Limit the number of users in the network

When more users are sharing the network, it may cause a problem. It’s ok when another person on the same network is just browsing the internet. But when multiple users are browsing videos, that may consume large data, so it’ll cause Frndly TV buffering.

Keep your WiFi router as close as possible to the device

Whatever the way you watch Frndly TV like watching through a smart TV, Roku device, Firestick, etc. Keep your WiFi modem as close as possible to the device. If the router is too far, it may cause a weak WiFi signal and cause buffering.

If possible, you could use an ethernet connection to your device rather than using WiFi for a more strong network.

Check whether the data plan has expired

Network providers may lower the speed to 2G or 3G when your current plan has expired. So check for that.

If any greater plan with speed improved, subscribe to it. Also, you have to check for the devices. If you are using a very old modem, and if there is any improved router available, upgrade to it.

Are you attempting to record on cloud DVR – Turn it off

Frndly TV premium subscription allows you to have unlimited cloud DVR recording. If your internet speed is very low and still you are trying to record the content, just postpone the recording.

If you are recording HD content for cloud storage and watching the content at the same time on a low-speed WiFi connection, the buffering issue will happen.

Clear device cache

Clearing the device cache and the app cache can help you to get rid of the Frndly TV buffering problem since it provides more internal storage for smooth functioning.

The cache on the device is cleared by options available on the menu items. Each device has a different method to clear the cache.

For clearing the cache on Frndly TV, you should log in to the app using your user ID and password. Then navigate to the settings tab. Find the clear cache tab and then clear it.

Close any background running apps that consumes more data

If you are watching Frndly TV on their official website platform, then the buffering issue may cause when any other apps run in the background. Suppose the apps or software running in the back consumes more data, the video streaming issue will happen.

This has happened many times to me. I used to play youtube videos and muted them, and at the same time, I opened a web application of Frndly TV to stream the Peacock channel. Since Youtube is streaming on another tab, I can’t watch the streaming better.

After closing the tab opened Youtube, After that the Frndly started streaming without any buffering issue.

Final Words

It’s time to conclude this post. I think I have covered all the tips that can help you to fix the Frndly TV video buffering error.

I assume you are not using any proxy server or VPN to stream the content. If so, you could connect to them for fixing the issue. So many VPN providers are not giving quality service. But my recommendation is to use a high-quality data provider to minimize this type of issue and stream better.

The post Fixing Buffering Issues on Frndly TV: 7 Effective Methods appeared first on Stream TV Better.

A factory reset is also recommended if you’re giving away or selling your Hisense Roku TV. It’ll wipe all personal data off the device and unpair it from any linked accounts, making it fresh for the next owner.

Below you’ll find a detailed, step-by-step walkthrough on how to successfully reset your Hisense television with Roku built-in. Along with the reset instructions, we also provide extra tips to ensure the process goes smoothly.

What You Should Know Before Resetting Your Hisense Roku TV

Before starting the reset process, there are a few important things to keep in mind:

– All installed channels/apps, account information and settings will be erased. Be sure to delete or unlink any payment details tied to streaming services or other apps beforehand.

– You’ll have to re-activate your Roku account and re-link it with services like Netflix, Hulu, etc after the reset. Make sure you have your Roku account password handy.

– Any saved information like WiFi passwords or input names will be cleared out as well during a reset. Write down anything you may need afterwards.

– A factory reset can resolve software glitches, app issues and freezing. If the problems continue, there may be a hardware fault instead.

Get Everything You Need Before You Reset

In addition to the password for your Roku account, here’s what you’ll want to have on hand:

– Hisense Roku TV remote and fresh batteries if needed. You’ll use this for navigating menus.

– Internet connection details for WiFi setup post-reset. Know your network name and wireless password.

– Phone or tablet with Roku mobile app. This makes typing info easier during setup prompts.

– List of channel/app logins you’ll need. Accounts for streaming platforms, cable provider, etc.

Step-by-Step Instructions to Reset Your Hisense Roku TV

Once you’ve prepped the items above, follow these exact steps:

1. From your TV’s home screen, press the Home button on the remote. Scroll right from the left-most menu and select “Settings”, then press OK.

2. Now go to “System” > “Advanced system settings” > “Factory reset”. Press OK after each selection.

3. You’ll get a factory reset confirmation screen explaining everything that will be deleted. Highlight “Factory reset everything” and press OK.

4. One last warning will appear. Choose “Reset” if you want to proceed.

5. Wait several minutes for the reset process to complete. The TV will restart itself when finished.

Set Up Your Hisense Roku TV Again Post-Reset

After your Hisense Roku television boots back up, you’ll need to repeat the initial product setup:

1. Select your language for menus and prompts. hit OK to advance.

2. Connect to the internet over WiFi. Have your network name and wireless password handy to link up.

3. Activate your Roku account or create a new one from scratch. Sign-in or make a account.

4. Input info like location and time zone. Also select privacy options or enable location services if wanted.

5. Re-link your Roku account with channel/app accounts from Netflix, Prime Video, etc. Sign back in on each one.

6. Set up desired settings like screen type, power mode, volume modes and captioning preferences.

Once the setup assistant finishes, your Hisense Roku TV will have a fresh, clean software install. Reinstall any extra apps you wish to use going forward.

Extra Tips for Avoiding Issues

To have the smoothest experience factory resetting your Hisense Roku television, keep these pointers in mind:

– Do not shut off the TV or unplug it during the resetting process. Wait for it to fully wipe and reboot.

– If for some reason it won’t reset successfully, unplug the power cable and press the power button for 10 seconds to discharge any leftover energy.

– Avoid resetting right after a major firmware update. Give the update some time to finalize first before wiping.

– Never factory reset to fix physical damage problems. It only resolves software-based issues.

– If apps continue struggling after the reset, check for Roku or app-specific updates next.

– For additional troubleshooting help, visit Hisense and Roku’s customer support websites.

Factory Reset First for Hisense Roku TV Problems

In summary, performing a factory reset should always be the first step when battling bugs, glitched apps or interface problems on a Hisense Roku TV. It’ll wipe the slate clean, allowing you to set up a trouble-free viewing experience again. Just be absolutely sure to backup anything important before resetting your device.

Follow the step-by-step reset guide outlined above. Have your Roku account info, internet details and other necessities on hand ahead of time as well. And if issues persist afterwards, further software fixes or hardware repairs may be required. But in most cases, a simple factory reset will get your Hisense television working like new again.

The post Resetting Your Hisense Roku TV: Easy Steps appeared first on Stream TV Better.

What Causes the DirecTV Screensaver to Keep Turning On?

There are a few common triggers for the DirecTV screensaver popping up out of nowhere:

– Inactivity Timer – DirecTV receivers have an automatic “inactivity timer” that activates the screensaver if no buttons on the remote or receiver are pressed for a set period of time. This could be every 10-15 minutes or longer.

– CEC Settings – Consumer Electronics Control (CEC) allows your devices to communicate. If enabled, the inactivity from your TV could trigger the DirecTV screensaver.

– Faulty Remote Control – If the buttons on your remote are sticking or malfunctioning, this could inadvertently trigger the inactivity timer and activate the screensaver.

– Buggy Software – Some users report the latest DirecTV software updates seem more prone to causing screensaver issues. Resetting and rebooting may help.

How to Stop the DirecTV Screensaver Turning On Repeatedly

If your DirecTV screensaver keeps interrupting your shows unexpectedly, here are 5 troubleshooting tips you can try to fix it:

1. Adjust Inactivity Timer Settings

The first step is adjusting the inactivity timer in your DirecTV receiver settings. This determines when the screensaver turns on due to remote/button inactivity:

– Go to Menu > Parental, Fav’s & Setup > System Setup
– Highlight and select “Screensaver”
– Change the “Inactivity Standby” setting to Off or 4 hours.

This should prevent the screensaver from coming on automatically every 10-15 minutes.

2. Disable CEC Settings

Since CEC allows your TV remote to control compatible devices, it could be triggering the DirecTV screensaver. To rule this out:

– Go to Menu > Parental, Fav’s & Setup > System Setup > HDMI Setup
– Disable anything related to “Control TV” or CEC

Now only your DirecTV remote will control your satellite receiver.

3. Check Your Remote Control

A faulty remote with sticky buttons could lead to errant signals turning on the screensaver. Thoroughly inspect your DirecTV remote:

– Check for stickiness, jammed buttons or a cracked casing
– Replace batteries and perform button tests from System Setup menu
– If issues persist, replace remote or try IR/RF pairing reset

This should stop any false remote presses engaging the inactivity timer.

4. Restart Your DirecTV Receiver

If you recently had a DirecTV software update, try restarting your satellite box:

– Go to Menu > Parental, Fav’s & Setup > System Setup > Reset
– Highlight and select “Restart Receiver”

Allow the full reboot and reset to occur which often resolves app, menu and screensaver glitches after an update.

5. Reset DirecTV Receiver to Factory Defaults

If other troubleshooting steps fail, reset your receiver:

– Go to Menu > Settings & Help > Settings > Reset
– Enter your PIN if prompted
– Select “Reset Everything” to factory restore

This wipes out all custom settings which tend to eliminate quirky software issues. You can then reconfigure your receiver intentionally rather than inherit old settings.

Avoiding Further DirecTV Screensaver Annoyances

Once you’ve stopped the screensaver from randomly popping up every few minutes, keep these points in mind:

– Be sure to explicitly enable the screensaver via the remote’s Power button if you want it when stepping away from the TV temporarily
– Similarly, utilize the remote’s Guide or List buttons to access on-screen menus which will prevent inactivity triggers
– Configure CEC and universal remotes properly to avoid confusing DirecTV receiver
– Periodically resetting your receiver after major firmware updates may prevent screensaver bugs

The DirecTV screensaver can certainly seem to have a mind of its own. But some customization to its triggering mechanisms and system resets should help you watch uninterrupted moving forward.

Over to You!

Hopefully by adjusting your DirecTV receiver’s inactivity timer, CEC and remote control settings, you’ve managed to get the pesky screensaver from interrupting your entertainment. Be sure to disable or tweak screensaver triggers after future software updates as well.

But if the annoying screensaver persists no matter what you try, don’t hesitate to contact DirecTV support. There may be an obscure hardware, connectivity or account issue at play a technician can quickly resolve.

Does your DirecTV screensaver turn itself on randomly? Have these troubleshooting tips successfully cured it? Let us know in the comments below!

The post How to Fix the DirecTV Screensaver That Keeps Appearing appeared first on Stream TV Better.

If you are a person of having sensitive ears, it’s intolerable.

Let’s break down why are Hulu ads so loud, and look at whether is there any solution to minimize such irritating loud noise.

Hulu ads (also called Hulu commercials) are created with louder sounds to pick your attention to the product. This is purely a business trick. Advertisements will reach many people when having loud audio. Since Hulu has millions of users, a huge benefit will get for advertisers when a very small percentage of people pay attention to the ads.

Basically, Hulu is an ads-driven service, that’s why they can provide their content for the lowest price. You can take other competitive services available in the market to compare the pricing, Hulu provides premium subscriptions as low as possible.

Why Hulu has so many commercials?

Like any other streaming platform, commercials are the primary source of income. They have huge expenses to run such a platform because they need to buy content from the creators, salaries for the employees, etc.

In addition to revenue from ads, they earn from the subscription charge too but they charge only the lowest price when compared to another similar type of service. That’s why they mostly rely on commercials for their revenue.

Since Hulu provides high-quality and popular content through its service, it should depend more on ads. Since their commercials are so loud and attract attention from the audience, the advertisers are interested to run their ads through this service.

As a consequence, they get more ad opportunities.

During the complete streaming of a show, there will be almost 5 – 7 ad breaks. It goes more than that if the content has more length.

Like in Youtube, and other services, we can’t skip the advertisement. This also makes irritation. But it may not be a problem if the ad sound is on a minimum volume.

How to avoid Hulu commercials or minimize the ad volume?

There are a few methods you can simply get rid of the ads or minimize the volume.

For smart TV users

If you are watching Hulu on a smart TV, then you can make use of the Auto volume feature to minimize the Hulu commercials. Basically, auto volumes on smart TVs are used to control the volume fluctuations while changing the channels.

You can turn on this feature on your smart TV to not suddenly increase the volume of ads during the show. Normally this feature can be found on your TV settings and the navigation through the menu is different on different brands of smart TVs.

Check Settings>>Sound on your TV. and turn it ON.

For those who watch Hulu on a web browser or computer

If you are using the Hulu web platform, then there is a Google chrome addon or extension available to get rid of the commercials.

I tested the Hulu ad skipper | Blocker on my Google chrome and got the best result. If you are using other browsers like Mozilla Firefox, Safari, Opera, etc, I suggest you move to Google Chrome for watching Hulu content even though the same addon is available for Firefox too.

Subscribe to Hulu’s No-ad package

If you can’t get any satisfactory results by applying the above-mentioned methods, you can completely ignore Hulu commercials by subscribing to their ad-free package for a cost of 14.99$ per month (Recently increased 2$). For testing this package, they provide a 30-day free trial.

However, Hulu’s no-ad package will completely remove the ads. Instead, some of them will show at the beginning and end of a show. The ads between the show will be eliminated.

The explanation for why Hulu shows ads even though you pay is that, according to the streaming rights, the streaming library will add a short ad breaker between the starting point of each content.

Can you skip Hulu ads?

There is no SKIP ADS option available when streaming a commercial on Hulu. But you can apply some tricks to skip them. When the advertisement starts showing, change the playback quality on the screen. Sometimes, the ads skipped and start streaming the content.

Alternatively, when ads start playing, close the video player and re-open it.

Conclusion

By saying this, it’s really worth watching ads on any platform. Because we can know the different products available in the market. This is a world of rapid evolution, day by day, a lot of useful and advanced products are invented and launched in the market and we can understand about the products mostly through advertisements.

So, it’s not bad while watch ads on Hulu, but do the given tips to reduce the volume of the commercials.

Related:-

• What does it mean EXP on Hulu?
• How to log out of Hulu on Roku?

The post How to Manage Loud Hulu Ads: Tips to Skip or Avoid Commercials appeared first on Stream TV Better.

Why Reset Your DirecTV Remote?

There’s a few reasons why you may need to reset your AT&T DirecTV remote:

– Remote is not functioning properly – If buttons on your remote aren’t working or it’s behaving oddly, a reset usually fixes any issues. Resetting can clear out any bugs and get your remote communicating properly with your receiver again.

– Pairing a new remote – If you got a new DirecTV receiver, you’ll need to pair your existing remote to the new hardware. The easiest way is to reset your remote which puts it into pairing mode.

– Pairing a replacement remote model – If you recently replaced your old DirecTV remote with a newer model, a reset will allow you pair the new device properly.

– Troubleshooting connection issues – If your remote has suddenly stopped controlling your DirecTV receiver, a simple reset often resolves any connectivity or communication problems.

How to Reset a Genie DirecTV Remote

Genie remotes are the most common model used with AT&T DirecTV systems. Here is how to properly reset a Genie DirecTV remote:

1. Locate the red reset/program button on the back of the remote.

2. Press and hold the red button for 10-15 seconds until the green light at top turns on and stays solid green.

3. When the green light stops blinking and stays constant, the remote is now in pairing mode.

4. Press menu on remote and if your TV says “Hello! Your remote is ready to program” then the reset worked properly.

After resetting your Genie remote, you can pair it to your DirecTV receiver using the on-screen prompts. If the reset was successful, the remote will control your receiver and TV functions again after pairing.

Resetting an RC7X DirecTV Remote

The RC7X was a popular model of DirecTV remote several years back. If you still use an RC7X, here is how to complete a reset on it:

1. Flip open the back cover to expose the batteries and locate the red reset button.

2. Using the eraser end of pencil, press and hold down the red button for at least 10 seconds.

3. The red indicator light will turn on when the remote enters reset/pairing mode.

4. Press power or mute on the remote to test if the reset was successful.

Older versions of the RC7X may need to remain in pairing mode for up to an hour before it reconnects properly with your receiver.

Resetting a DirecTV RC65 Remote

The RC65 is an older yet still used DirecTV remote. To reset it:

1. Remove the battery cover on the back of the remote.

2. Press and hold down the SETUP button while reinserting the batteries.

3. Keep holding the button down for an additional 3 seconds before releasing.

4. The red LED light will flash twice when the remote enters reset mode.

Once complete, re-pair the remote using your receiver’s on-screen pairing prompt.

How to Reset a Directv RC32 Remote

The small RC32 DirecTV remote uses the following reset procedure:

1. Remove cover to access batteries. Locate small reset pinhole button.

2. Use paperclip to press and hold reset button for 3 seconds.

3. Red indicator light will flash 6 times when remote resets successfully.

Remember to re-pair remote to your receiver after completing a reset.

Reset DirecTV RC73 Genie Mini Remote

For DirecTV’s mini genie RC73 remote:

1. Slide open battery cover on remote’s underside to expose batteries.

2. Press and hold mute+select buttons simultaneously for 10+ seconds.

3. Your TV will display a “Remote Reset Successfully” message when finished.

Pair your RC73 again by pressing mute+enter on the remote itself.

Troubleshooting DirecTV Remote Resets

While most remote resets go smoothly, you may encounter a few issues:

– If the remote does not display a solid or blinking light during the reset process, the batteries may need to be replaced.

– If the reset seemed to work but your remote won’t pair or control your receiver, repeat the reset following all directions closely again.

– If your specific remote model is not detailed above, check user manuals or DirecTV’s website for proper reset procedures.

– Firmly press and hold remote buttons when resetting. Buttons not properly made contact with during resets is a very common issue.

– DirecTV remotes sometimes take up to an hour after being reset to reconnect with your hardware. Be patient and retry any commands after some time has passed.

– As a last resort, you may need to call DirecTV tech support if your remote is non-responsive after one or more attempted resets.

Resetting your AT&T DirecTV remote will solve a majority of remote control issues and get you up and running again after only a few minutes. Be sure to follow the directions specific to your model remote above and don’t hesitate to repeate the steps if needed. With a simple reset, your DirecTV remote will be controlling your system again smoothly.

The post Resetting Your AT&T DirecTV Remote: A Quick Guide appeared first on Stream TV Better.