What Does “Local Channels Not Working” Mean Exactly?

There are a few different issues that could occur when someone says their DirecTV local channels aren’t working properly:

– No signal at all – The local channel may just show a black or blue screen. This usually indicates a reception issue with your dish setup.

– Pixelated, distorted picture – The video comes through but is full of visual artifacts like pixelation, distorted shapes and colors. This can signify a weak signal.

– Guide shows channel but video won’t play – The channel logo and info shows normally on the guide, but when you select the channel it doesn’t load any video. Typically a device connectivity problem.

So first you need to observe carefully what the actual symptom is when you try tuning to a local channel that “isn’t working.” That will guide your next troubleshooting steps.

Check Your DirecTV Internet Connection

Many of DirecTV’s features including access to local channels require an internet connection. If you previously had local channels working then suddenly lost reception, check that your DirecTV box and dish still have a solid broadband connection. Reset modems and routers if needed, or call your ISP if the internet is out entirely. This could immediately restore missing local channel functionality while you investigate other issues.

Inspect Cable Connections to TVs and Receivers

Loose HDMI or coaxial cables are one of the most common causes of DirecTV problems, including losing access to local channels. Verify that every cable connecting your dish, switch or splitter, DVRs and receivers, and TVs themselves are inserted snugly. Tighten any loose connections and replace any damaged cables if necessary. Check behind your hardware too for any unplugged cords you may have missed. Solid cable connectivity facilitates better channel signal transfer.

Check DirecTV Receiver Signal Strength

Your receiver box processes signals from your dish to decode local and other channels beamed to your home. If signal strength reaching the box is too low due to dish alignment problems, local channels may cut out. Access signal strength info by going to Menu > Settings > Info & Test > More System Info on older DirecTV boxes. HD receivers display dish signal meters on Menu > Settings & Help > Settings > Info & Test. Aim for at least 70% and no more than 105% signal for reliable local channel functionality.

Realign Your DirecTV Satellite Dish

Misalignment of your dish happens gradually over time due to weather events, light pole shifts, housing settling, and other factors. If your local ABC, CBS, NBC or Fox channels are unwatchable or lost altogether, realigning the dish can get them back. Refer to DirecTV support for proper realignment steps based on your setup. Essentially you’ll tilt, rotate, and shift the dish while monitoring signal strength readings until optimal alignment with DirecTV satellites is achieved. Then re-scan channels from the receiver menu.

Check Local Channel Availability for Your Area

While rare today, certain zip codes still don’t have access to some local DirecTV channels due to licensing restrictions. And if you recently moved homes, the local channel availability likely changed and requires updating your receiver location access settings before tuning eligibility resets. If missing channels were once available but now aren’t, double check that your local channel lineup is valid. Compare with the Local Channel Lists on DirecTV’s site or the receiver guide to verify which local stations should show based on your physical address.

Reset Your DirecTV Box and Restart Your TV

As with most electronics, occasionally a basic device reset clears up DirecTV issues like missing local channels, frozen screens, laggy guides, and more. First unplug the power cord from both the receiver itself and your television to fully cut electricity. Wait 20 seconds before plugging both back in and powering on your TV and receiver. If the boxes were just stuck, this refresh often fixes problems accessing local channel video and info. Slow internet connectivity mentioned earlier can also cause boxes to lock up over time.

Call DirecTV Support for Additional Troubleshooting

Even after trying the above tips, some homes encounter stubborn local channel functionality problems due to equipment failures, wiring complexities, trees/buildings blocking signals, and other issues specific to each location. If you cannot restore your local ABC, CBS, NBC and Fox channels, it’s time to call the experts. The DirecTV technical support team can analyze your setup, signal readings, account status, and troubleshooting steps already attempted to isolate the problem and clearly explain how to regain access to critical local broadcasts.

Stay Calm and Keep Testing

Losing easy access to important local news, weather, and network TV shows can certainly be stressful and inconvenient. But calmly and systematically running through the troubleshooting solutions above will help narrow down exactly why your DirecTV local channels stopped working properly. In many cases it ends up being a quick fix. Record your observations of channel issues, signal readings, connections checked, and other details which support agents can utilize to speed up restoration of your complete channel lineup. With patience and persistence, you’ll likely have your local ABC, CBS, Fox, and NBC programs streaming again shortly.

The post Directv Local Channels Not Working appeared first on Stream TV Better.

In this post, I am going to list all the music channels on DirecTV with the channel numbers in 2024.

In the DirecTV satellite dish DVR (not streaming box), the music channels are arranged from the numbers 801 to 884. All of them are listed in order so that it’s easy for you to access all the channels in between these numbers.

In order to access the channels, you just need to put the channel number using your remote control. In addition to the music choice channels, so many free radio stations are also available.

The DirecTV Music channels list with channel numbers in 2024

DirecTV offers 84 music channels.  Here is the list.

The list is up to date. Keep visiting the page to know if new channels are added to the subscription pack.

What genres of music choice channels are available on DirecTV?

This list contains channels from almost all Genres and categories. You can enjoy the stations according to your mood.

If you are under pressure, or in a struggling mood, just put in your favorite music station and then relax.

When you want to entertain with some Rock and pop songs with visuals, enjoy them with a high-quality video and sound.

The different Genres are

• Hip hop
• Spiritual
• Romantic songs
• Rock songs
• Classical
• Symphony
• Western
• County-wise
• Guitar
• Band
• Regional
• Latin hits
• Americal Only
• Italian
• Religious
• Local Music
• Piano, etc.

No need for special recharge – Available with all the packages

The above-listed channels will be available with all the recharge options. If you are using any one of the packages like DirecTV entertainment, Premium, Choice, or ultimate pack, you can enjoy these music stations unlimited.

These channels have special programs the famous celebrations in the united states, Mexico, Canada, etc, like Christmas, Ney Year, National Day, Thanksgiving day, Black Friday, etc.

MC app with video channels – Listen to Songs on the go

I just wanted to let you know that, the DirecTV app has an MC section (music choice) where you can watch the music choice shows/programs on the go with your smart devices.

Their Android and iOS apps carry different free MC radio stations. You can simply search for the channel and stream on your mobile phone.

What to do when DirecTV music channels are not working?

This only happens when you are refused to renew your subscription pack. Check whether your DirecTV subscription has expired. If yes, then recharge immediately to start watching your favorite music stations.

When there are expired recharge packs, still you can some of the local channels for free.

Conclusion

In addition to the satellite DVR box, you can enjoy music with the DirecTV streaming service. You can select the channels from the streaming account dashboard.

After signing in to your account, you can see the tab “ALL” in the top left corner where you can see a list of all the available channels. On the search box, type your favorite music channel to select and start streaming it.

In the DTV streaming service, there are no numbers to quickly jump, but you can search by typing the channel name to sort out.

The post What Are The Music Channels On DirecTV? [Complete List 2024] appeared first on Stream TV Better.

In this handy guide, we’ll outline the different methods available for raising Vizio TV volume without a remote. Whether your Vizio TV model has capacitive volume buttons, manual rear controls, or can connect to the Vizio SmartCast app, we’ve got you covered. Just follow our clearly explained, step-by-step instructions below to start enjoying loud, crisp audio from your TV again in minutes!

Use The Capacitive Volume Buttons
Many modern Vizio TV sets feature capacitive volume buttons right on the TV frame. Capacitive buttons operate through touch instead of physically clicking in. Check below or beside the lower right corner of your Vizio TV frame for small outlined circles or plus/minus symbols. If present, these indicate capacitive volume buttons.

To use capacitive volume buttons to increase audio levels:

1. Lightly press a finger to the plus (+) volume button outline – more firmly for faster volume acceleration. You should see a volume slider display on-screen when making adjustments.

2. Keep holding finger pressure on the plus button until you reach your desired loudness.

3. That’s it! Enjoy your Vizio TV at the newly magnified volume.

Bear in mind that without the remote, you won’t be able to activate Mute or access advanced audio options like equalizer levels. But capacitive buttons provide an easy path to directly raise Vizio TV volume in a pinch.

Adjust Rear Manual Controls
If locked out of adjustments through your Vizio TV’s front-facing controls, check the rear manual controls. Turn the TV around to view inputs/outputs panel on back, upper right. Study connections to locate a 3.5mm headphone-style jack labeled “Audio Out.” This important port provides access to rear manual volume dials.

Follow below steps:

1. If your Vizio TV didn’t come packaged with audio extension cables, purchase a female-to-male 3.5mm extension cable online or from your local electronics store.

2. Connect extension cable end tipped with 3.5mm male headphone jack into the “Audio Out” port on back of TV. The port is sometimes marked with red and white RCA colors; 3.5mm plug still compatible.

3. Now grab opposite end and connect headphones or portable speakers with 3.5mm jack. This creates an auxiliary audio connection allowing external volume control.

4. Access inline volume controls on your connected headphones or speakers to directly alter Vizio TV loudness to desired levels.

This method provides full touch control over TV audio levels using remote buttons on headphone or speaker devices. Volume can be minutely or drastically magnified as you please. Just be sure to disconnect setup when done for safety.

Link With Vizio SmartCast Mobile App
If your Vizio TV came out within the last few years, it likely supports SmartCast – Vizio’s proprietary smart platform enabling app control, streaming access and voice commands. If you paired your Vizio TV to the Vizio SmartCast Mobile app before losing the remote, you still retain full audio control from supported smartphones and tablets!

Here is how to leverage SmartCast to increase audio remoteness-free:

1. Confirm your Vizio TV is connected on the same WiFi network as your mobile device. Enable Bluetooth on both if utilizing voice remote assistant.

2. Download and open the free Vizio SmartCast Mobile app, available for iOS and Android.

3. Select your model Vizio TV from My Devices menu if first device pairing. Otherwise, accessible hardware lists on the app’s Home page.

4. Tap the Volume icon to open smart slider. Drag right on slider or tap plus (+) icon to raise loudness.

Alternatively, you can touch and hold mic icon to enable Voice Assistant for hands-free loudness control. Just speak voice commands like “Volume Up” aloud and the Vizio TV will obey!

Connecting to SmartCast gives you back app and voice-powered volume adjustment – albeit still minus advanced audio tweaks. Nonetheless, this free mobile method lets you comfortably amplify volume levels on demand.

Purchase Universal TV Remote
If the above options aren’t viable, consider buying an inexpensive universal remote as alternate solution for managing Vizio TV volume absent its packaged clicker. Compatible universal remotes are available at most big box retailers, TV/electronics stores or online for under $20.

Models like the Logitech Harmony 650 can control nearly any modern Vizio TV with custom programming. While universal remotes lack the refined model-specific functions of OEM counterparts, their core abilities like volume adjustment provide useful temporary substitutes.

To quickly set up universal remote:

1. Install batteries in remote to power on.
2. Locate 4+ digit Vizio brand code either behind device or via web search.
3. Press and hold Setup button on remote until indicator light blinks.
4. Input brand code via number pad then press OK to save configuration.
5. Test if digit keys now manipulate volume control. If no, retry programming process.

While buying a backup remote is an added cost if you later recover your Vizio clicker, it grants reliable interim loudness control. Plus you’ll have spare remote for next time this happens!

In Review: How To Pump Up Volume On Vizio TV Without Remote
Losing your Vizio TV remote can put quite the damper on your viewing experience if you have no way to adjust critical functions like volume. Thankfully various alternative options exist for directly controlling audio levels without a remote handy:

– Capacitive Volume Buttons: Use outlined touch-sensitive external controls to slide volume up/down.
– Rear Manual Jack: Connect auxiliary headphones/speakers to back panel for cross-device volume buttons.
– Vizio SmartCast Mobile App: Adjust Vizio Smart TVs remotely via paired app with slider or voice.
– Universal Remote: Affordable substitute able to digitally mimic Vizio volume clicks after programming.

With the simple accessibility workarounds outlined above, you need not let a misplaced Vizio remote ruin audio immersion when trying to hear crisp, heightened dialogue and sound effects from favorite streaming, Blu-Ray or over-the-air content. Just utilize the appropriate technique above to pump up the volume on command according to your exact Vizio TV hardware. Your ears will thank you!

The post How To Turn Up Volume On Vizio Tv Without Remote appeared first on Stream TV Better.

What Causes the DirecTV Screensaver to Keep Turning On?

There are a few common triggers for the DirecTV screensaver popping up out of nowhere:

– Inactivity Timer – DirecTV receivers have an automatic “inactivity timer” that activates the screensaver if no buttons on the remote or receiver are pressed for a set period of time. This could be every 10-15 minutes or longer.

– CEC Settings – Consumer Electronics Control (CEC) allows your devices to communicate. If enabled, the inactivity from your TV could trigger the DirecTV screensaver.

– Faulty Remote Control – If the buttons on your remote are sticking or malfunctioning, this could inadvertently trigger the inactivity timer and activate the screensaver.

– Buggy Software – Some users report the latest DirecTV software updates seem more prone to causing screensaver issues. Resetting and rebooting may help.

How to Stop the DirecTV Screensaver Turning On Repeatedly

If your DirecTV screensaver keeps interrupting your shows unexpectedly, here are 5 troubleshooting tips you can try to fix it:

1. Adjust Inactivity Timer Settings

The first step is adjusting the inactivity timer in your DirecTV receiver settings. This determines when the screensaver turns on due to remote/button inactivity:

– Go to Menu > Parental, Fav’s & Setup > System Setup
– Highlight and select “Screensaver”
– Change the “Inactivity Standby” setting to Off or 4 hours.

This should prevent the screensaver from coming on automatically every 10-15 minutes.

2. Disable CEC Settings

Since CEC allows your TV remote to control compatible devices, it could be triggering the DirecTV screensaver. To rule this out:

– Go to Menu > Parental, Fav’s & Setup > System Setup > HDMI Setup
– Disable anything related to “Control TV” or CEC

Now only your DirecTV remote will control your satellite receiver.

3. Check Your Remote Control

A faulty remote with sticky buttons could lead to errant signals turning on the screensaver. Thoroughly inspect your DirecTV remote:

– Check for stickiness, jammed buttons or a cracked casing
– Replace batteries and perform button tests from System Setup menu
– If issues persist, replace remote or try IR/RF pairing reset

This should stop any false remote presses engaging the inactivity timer.

4. Restart Your DirecTV Receiver

If you recently had a DirecTV software update, try restarting your satellite box:

– Go to Menu > Parental, Fav’s & Setup > System Setup > Reset
– Highlight and select “Restart Receiver”

Allow the full reboot and reset to occur which often resolves app, menu and screensaver glitches after an update.

5. Reset DirecTV Receiver to Factory Defaults

If other troubleshooting steps fail, reset your receiver:

– Go to Menu > Settings & Help > Settings > Reset
– Enter your PIN if prompted
– Select “Reset Everything” to factory restore

This wipes out all custom settings which tend to eliminate quirky software issues. You can then reconfigure your receiver intentionally rather than inherit old settings.

Avoiding Further DirecTV Screensaver Annoyances

Once you’ve stopped the screensaver from randomly popping up every few minutes, keep these points in mind:

– Be sure to explicitly enable the screensaver via the remote’s Power button if you want it when stepping away from the TV temporarily
– Similarly, utilize the remote’s Guide or List buttons to access on-screen menus which will prevent inactivity triggers
– Configure CEC and universal remotes properly to avoid confusing DirecTV receiver
– Periodically resetting your receiver after major firmware updates may prevent screensaver bugs

The DirecTV screensaver can certainly seem to have a mind of its own. But some customization to its triggering mechanisms and system resets should help you watch uninterrupted moving forward.

Over to You!

Hopefully by adjusting your DirecTV receiver’s inactivity timer, CEC and remote control settings, you’ve managed to get the pesky screensaver from interrupting your entertainment. Be sure to disable or tweak screensaver triggers after future software updates as well.

But if the annoying screensaver persists no matter what you try, don’t hesitate to contact DirecTV support. There may be an obscure hardware, connectivity or account issue at play a technician can quickly resolve.

Does your DirecTV screensaver turn itself on randomly? Have these troubleshooting tips successfully cured it? Let us know in the comments below!

The post Fix Directv Screensaver Keeps Coming On appeared first on Stream TV Better.

Why Reset Your DirecTV Remote?

There’s a few reasons why you may need to reset your AT&T DirecTV remote:

– Remote is not functioning properly – If buttons on your remote aren’t working or it’s behaving oddly, a reset usually fixes any issues. Resetting can clear out any bugs and get your remote communicating properly with your receiver again.

– Pairing a new remote – If you got a new DirecTV receiver, you’ll need to pair your existing remote to the new hardware. The easiest way is to reset your remote which puts it into pairing mode.

– Pairing a replacement remote model – If you recently replaced your old DirecTV remote with a newer model, a reset will allow you pair the new device properly.

– Troubleshooting connection issues – If your remote has suddenly stopped controlling your DirecTV receiver, a simple reset often resolves any connectivity or communication problems.

How to Reset a Genie DirecTV Remote

Genie remotes are the most common model used with AT&T DirecTV systems. Here is how to properly reset a Genie DirecTV remote:

1. Locate the red reset/program button on the back of the remote.

2. Press and hold the red button for 10-15 seconds until the green light at top turns on and stays solid green.

3. When the green light stops blinking and stays constant, the remote is now in pairing mode.

4. Press menu on remote and if your TV says “Hello! Your remote is ready to program” then the reset worked properly.

After resetting your Genie remote, you can pair it to your DirecTV receiver using the on-screen prompts. If the reset was successful, the remote will control your receiver and TV functions again after pairing.

Resetting an RC7X DirecTV Remote

The RC7X was a popular model of DirecTV remote several years back. If you still use an RC7X, here is how to complete a reset on it:

1. Flip open the back cover to expose the batteries and locate the red reset button.

2. Using the eraser end of pencil, press and hold down the red button for at least 10 seconds.

3. The red indicator light will turn on when the remote enters reset/pairing mode.

4. Press power or mute on the remote to test if the reset was successful.

Older versions of the RC7X may need to remain in pairing mode for up to an hour before it reconnects properly with your receiver.

Resetting a DirecTV RC65 Remote

The RC65 is an older yet still used DirecTV remote. To reset it:

1. Remove the battery cover on the back of the remote.

2. Press and hold down the SETUP button while reinserting the batteries.

3. Keep holding the button down for an additional 3 seconds before releasing.

4. The red LED light will flash twice when the remote enters reset mode.

Once complete, re-pair the remote using your receiver’s on-screen pairing prompt.

How to Reset a Directv RC32 Remote

The small RC32 DirecTV remote uses the following reset procedure:

1. Remove cover to access batteries. Locate small reset pinhole button.

2. Use paperclip to press and hold reset button for 3 seconds.

3. Red indicator light will flash 6 times when remote resets successfully.

Remember to re-pair remote to your receiver after completing a reset.

Reset DirecTV RC73 Genie Mini Remote

For DirecTV’s mini genie RC73 remote:

1. Slide open battery cover on remote’s underside to expose batteries.

2. Press and hold mute+select buttons simultaneously for 10+ seconds.

3. Your TV will display a “Remote Reset Successfully” message when finished.

Pair your RC73 again by pressing mute+enter on the remote itself.

Troubleshooting DirecTV Remote Resets

While most remote resets go smoothly, you may encounter a few issues:

– If the remote does not display a solid or blinking light during the reset process, the batteries may need to be replaced.

– If the reset seemed to work but your remote won’t pair or control your receiver, repeat the reset following all directions closely again.

– If your specific remote model is not detailed above, check user manuals or DirecTV’s website for proper reset procedures.

– Firmly press and hold remote buttons when resetting. Buttons not properly made contact with during resets is a very common issue.

– DirecTV remotes sometimes take up to an hour after being reset to reconnect with your hardware. Be patient and retry any commands after some time has passed.

– As a last resort, you may need to call DirecTV tech support if your remote is non-responsive after one or more attempted resets.

Resetting your AT&T DirecTV remote will solve a majority of remote control issues and get you up and running again after only a few minutes. Be sure to follow the directions specific to your model remote above and don’t hesitate to repeate the steps if needed. With a simple reset, your DirecTV remote will be controlling your system again smoothly.

The post Reset Att Directv Remote appeared first on Stream TV Better.

What is Peacock TV?

For those unfamiliar, Peacock TV is a streaming service from NBCUniversal that gives you access to current NBC shows, classics like The Office and Saturday Night Live, as well as movies, news, sports and originals you can’t watch anywhere else. It offers a free ad-supported tier, a Premium ad-supported plan for $4.99/month and an ad-free Premium plan for $9.99/month. The free tier gives you about 15,000 hours of content, while the paid plans unlock more than double the amount of movies, shows and originals in up to 4K resolution where available.

Can I Record Shows on Peacock TV?

Unlike Netflix or other major streamers, Peacock TV does give subscribers the ability to record certain programs to watch later. However, the DVR functionality is limited and it varies depending on which device you’re using to access the Peacock app.

On Mobile and Web
Unfortunately, you cannot record Peacock TV content when watching via a web browser or the Peacock mobile app. There is no native DVR or download option offered on phones, tablets or laptops/desktops currently. So if you’re streaming over WiFi or mobile data, you have to watch a show live or on-demand as its aired and hope it doesn’t run into buffering or connection problems.

On Smart TVs and Media Players
This is where you do get some DVR capabilities with Peacock TV. If you have a smart TV, media streamer or gaming console with the Peacock app installed, certain devices will let you record to the cloud so you can watch episodes and movies later even when offline. Keep in mind that you typically need a Premium subscription for DVR functionality.

As of early 2023, Peacock confirms you can record and download shows on these supported devices:

• Apple TV 4K and Apple TV HD
• Google Chromecast with Google TV
• LG Smart TVs (webOS 3.0 and higher)
• Vizio SmartCast TVs

On Cable Set-Top Boxes
Additionally, Comcast Xfinity X1 and Flex cable boxes support recording Peacock programming due to Comcast’s partnership with NBCUniversal. So if you have Comcast cable TV, you can record and access Peacock content seamlessly via your Xfinity voice remote and TV guide menu just like any other channel.

Peacock TV Recording Limits
While being able to record shows on Peacock TV is great, there are some definite limitations cable DVR users will find restrictive:

– You can only record certain shows and movies flagged as “Downloadable”
– Recordings are removed after 30 days
– The number of recordings you can save varies by device, but ranges between 25-100 hours
– No skipping or fast-forwarding ads on recorded content
– 4K recordings use more storage space

So when it comes to recording on Peacock TV, your functionality will be constrained compared to streaming downloads or unlimited DVR storage some competitors offer. Make sure you watch any saved shows within 30 days as they will automatically be deleted afterward.

Tips for Recording Peacock TV Shows
If you want to get the most out of Peacock TV’s recording features, keep these tips in mind:

• Check which devices allow recording and downloads ahead of signing up
• Make note of the 30-day expiration so you don’t lose recordings
• Save your favorite episodes and movies you want to rewatch
• Binge a recorded series before it gets removed
• Cancel old recordings if you hit the storage limit
• Connect to WiFi for quicker downloads & streaming

While recording capabilities are limited, having the option to save Premium shows and movies for offline viewing is a nice benefit – especially for travel and commute viewing.

The Future of Peacock TV DVR
As Peacock TV bolsters its content library and looks to compete with established services like Netflix and Hulu, expanding DVR functionality will be key. Cord-cutting streaming viewers have come to expect robust DVR and download options for maximum flexibility.

We expect Peacock to enhance recording options over time across more devices, ideally offering unlimited storage like YouTube TV as well as downloading for mobile devices. The service is still fairly young, so improvements to the DVR system will likely happen down the road.

For now, Peacock TV offers basic recording that lets Premium subscribers save shows and movies for up to 30 days. That gives you a way to replay content offline or prevent buffering issues – with some clear limitations. Keep an eye out for updates as Peacock works to improve the viewing experience for streaming audiences.

The post Can You Record Peacock Tv appeared first on Stream TV Better.

What Viewers Get from The Weather Channel

From sunny skies to severe storms, The Weather Channel reports conditions across the United States and around the world. Using the latest meteorological technology and field reporting, TWC keeps audiences safe and informed.

Some key offerings that make TWC a go-to weather resource include:

• Local Weather – Get real-time, hyperlocal forecasts for any town or city. Personalize your weather to where you live, work, and play.

• Severe Weather Alerts – Stay ahead of extreme weather with life-saving alerts for tornadoes, flash floods, hurricanes and other threatening conditions.

• Weather News – Go beyond today’s forecast with climate change coverage, explainers on weather phenomena, and more.

• Engaging Visuals – Track storms, temperatures changes, and precipitation with interactive maps, radars, and video.

Where to Find TWC on DirecTV

As a DirecTV subscriber, you already have access to the around-the-clock weather reporting of The Weather Channel. Here’s a breakdown of where to tune in:

• Channel 362 in SD
• Channel 362 in HD

For the best viewing quality, watch TWC’s coverage in high definition on channel 362-1.

TWC Programming Highlights

From weekday wake-up weather to primetime docuseries, The Weather Channel offers informative and engaging shows to follow. Here’s a preview:

• AMHQ – Start your morning off right with up-to-the-minute conditions and forecasts.

• Weather Underground – Get geeky with forecasts, radar trends, and model comparisons.

• Highway Thru Hell – Ride along on high-risk rescue missions on treacherous Canadian highways.

• So You Think You’d Survive – Wildlife expert Creek Stewart rates survival skills that could save lives.

Check your DirecTV guide for show times or set recordings so you never miss must-see TWC programming.

Streaming Options

If you want access to The Weather Channel when you’re away from your TV, DirecTV offers streaming. Watch TWC live or view up to 20 hours of Cloud DVR recordings of your favorite shows:

• Stream online at directv.com/streamlive or use the DirecTV app
• Required: DirecTV subscription with streaming add-on

Get More from Your Weather Channel Experience

Completely customized forecasts, severe weather alerts, on-ground and expert analyses plus engaging original programs – The Weather Channel offers all this and more. DirecTV makes it easy to access TWC around the clock.

For the latest weather where you are plus today’s national outlook, flip to channel 362 and let The Weather Channel keep you informed and safe through every kind of weather.

The post The Weather Channel On Directv appeared first on Stream TV Better.

In this blog post, I’ll provide a comprehensive list of the most popular TV channels across genres like news, sports, movies, lifestyle, and more. Read on to discover channels that offer the best entertainment, information and enjoyment on traditional cable and satellite TV.

News Channels

CNN – CNN is arguably the biggest name in 24/7 cable news. Their non-stop coverage keeps viewers informed on the latest breaking news stories from politics, world events, business, tech, and more. Top shows include Anderson Cooper 360, CNN Tonight with Don Lemon among others.

Fox News – Fox News provides news with a conservative right-wing perspective. Their opinionated anchors and partisan viewpoint make it one of the top-rated news channels in the US. Top shows are Hannity, Tucker Carlson Tonight and The Five.

MSNBC – The biggest left-leaning news network in the US, MSNBC offers a liberal counterpoint to Fox News. Rachel Maddow, Lawrence O’Donnell and Nicolle Wallace are popular hosts driving viewership, especially among more progressive audiences.

BBC World News – BBC World News brings credible international news coverage from the renowned British broadcaster. Their in-depth global reporting is among the best in the business.

Sports Channels

ESPN – No list of channels is complete without the “worldwide leader in sports” ESPN. They offer live games, highlights, and analysis for pro and college sports including NFL, MLB, NBA, NCAA football & basketball, NHL, soccer and more. SportsCenter is their long-running flagship program.

FS1 – Fox Sports 1 rivals ESPN with their own extensive sports programming. They boast rights to MLB, NASCAR, FIFA World Cup soccer, UEFA Champions League soccer, college sports and more. Top personalities like Skip Bayless and Shannon Sharpe drive opinionated discussions.

NFL Network – Football fans who can’t get enough of pro pigskin turn to NFL Network all year long. They air live games, NFL Combine coverage, Emmy award-winning NFL Films series, and in-depth commentary. It’s a must-have channel for hardcore NFL fans.

Movie Channels

TNT – If you love movies, TNT airs them 24/7 with limited commercial interruptions. Big premieres, classic films, cult favorites, and current box office hits are all part of their programming. Their original dramas like Snowpiercer and Animal Kingdom also have a cinematic feel.

TCM – Turner Classic Movies offer viewers a chance to indulge in cinema from Hollywood’s golden age. Iconic films, renowned stars and directors, independent movies and foreign cinema classics are all remastered and presented by TCM’s knowledgeable on-air hosts.

AMC – As American Movie Classics, AMC built a reputation as a go-to destination for classic movies. While they still air iconic hits, they also now premiere exclusive series like The Walking Dead, Better Call Saul, Interview with the Vampire and more.

Lifestyle Channels

HGTV – Home & Garden TV fuels viewers dreams of buying, designing and renovating homes. Their immensely popular shows feature house hunters, renovation reveals, interior design tips, landscaping ideas and more. Top titles include Love It or List It, Fixer Upper, Property Brothers and more.

Food Network – Food Network celebrates all things culinary, from baking competitions to chef showdowns to comforting recipes. Established names like Guy Fieri, Bobby Flay, Ina Garten and newcomers constantly deliver foodie content spicing up the channel.

Bravo – Bravo pioneered reality TV as one of the first mainstream lifestyle channels. Today, it features outrageous personalities across formats covering fashion, beauty, design, pop culture and relationships. Top shows include the Real Housewives franchise, Million Dollar Listing, and Below Deck.

The list above covers twenty of the most popular channels across news, sports, movies and lifestyle programming. With this diverse mix, it’s easy to find exciting, entertaining content to watch on cable/satellite TV in 2023. So sit back, grab your remote and scroll through traditional television made for today’s savvy viewers.

The post Frndly Tv Channels List 2024 appeared first on Stream TV Better.

For example, the DirecTV error code 771 shows the signal issue, so we should do the necessary steps that avoid signal interruption.

The DirecTV error code 721 shows when you are trying to access the channel which is not in your subscription pack. You can quickly get rid of the error by reviewing your pack and taking action to upgrade to the higher plan.

How to fix the DirecTV error code 721?

Since your subscribed channel package doesn’t allow you to watch the channel you are looking for, you should change the package.

Upgrade to a higher package

Check what plan or package offers the channel you wanted. Then upgrade to the pack so that you can fix the 721 error code.

Before changing your DirecTV plan, you should go through the list of channels available with each and every pack, then find the most suitable package for you that has almost all your favorite channels included, and you can upgrade to it.

This can help you to lose money when you want to upgrade again for some other channels before your current plan expires. So many national and local channels are added and removed for different plans.

Some sub-channels like MeTV can’t be directly accessed Via your DirecTV but you should use an antenna to get those channels on-air basis. So cross-checking is a must.

I am providing the lineup file here, check on it

https://www.directv.com/dtvassets/pdfs/channel_lineups/DIRECTV_ChannelPackageLineUp_AllPackages.pdf

6 types of plans are available as of now with DirecTV subscriptions such as

1. Family
2. Select
3. Entertainment
4. Choice
5. Premiered Extra
6. Xtra
7. Ultimate
8. Premier

Important Note

Some local channels are not available in some regions. This also delivers DirecTV 721 errors. So make a confirmation regarding this. You can either directly contact their customer support team or contact the dealer to get help regarding this.

Refresh your service and receiver

Have you upgraded the plan, but not fixed the 721 error code? The most probable reason may be due to the cache on the receiver and your account.

Restart and refresh your DirecTV account and the receiver box once you do any changes to your account like changes to the plan. This will refresh the account and clear all the cache memory.

Once you refresh, the error message 721 will be fixed.

Refreshing the service means login into the DirecTV website. Then navigate to the My Account section and find the My equipment section. Your Box name will be listed there.

A Refresh link will be available just beneath the DVR box name. Click on it to refresh the service.

What does it mean to restart the receiver?

Unplugging from the power outlet. Removing all the connections. Wait for 2 minutes, and re-plug and switch ON.

By doing these two steps, your receiver will get the channel programming information from the server and will fix error 721.

That’s all.

Why some channels are not showing in my subscription?

When there is a blank page with a DirecTV screensaver or a message with error code 721, you can confirm that the channel is absent within the package you subscribed to.

Maybe the channel was dropped from the subscription pack or it moved to another package. If the channel you are watching daily is dropped from the plan, you need to upgrade the plan. If not, you can contact customer support to know the exact reason.

Conclusion

As a DirecTV user, you should know the error code and what does it mean to simplify the error fixing. In this post, I write about all the errors that happened to me so that you can get a tutorial to get it fixed soon.

Related Posts:-

• What music channels are available on DirecTV?

The post What Is DirecTV Error Code 721? [How to Fix?] appeared first on Stream TV Better.

If you’re a MeTV devotee, knowing what’s going to air on the network each night is key. That way, you never miss an episode of your favorite retro shows. Below, we’ll outline several easy methods for finding tonight’s MeTV schedule.

Check MeTV’s Website

The most straightforward approach is to simply visit metv.com. Their easy-to-navigate website clearly lists the shows set to air in your area for any given date.

To find tonight’s lineup:

1. Go to metv.com

2. Mouse over “Schedule” in the top navigation bar

3. Select “Tonight’s Schedule” from the drop-down menu

You’ll then see a complete rundown of programs MeTV has scheduled to air today in your local area, broken down hourly. You can scroll down to see the full primetime lineup as well as late night shows.

The schedule also notes important details like episode names and summaries. So if you want to know plot specifics of the I Love Lucy or Carol Burnett Show episode airing this evening, the site has you covered.

Download the MeTV App

In addition to their website, MeTV also offers a free mobile app for iOS and Android. The app provides a streamlined view of tonight’s programming in the palm of your hand.

To use the app to view today’s schedule:

1. Download the MeTV app from the Apple App Store or Google Play Store

2. Open the app and select the “Schedule” tab at bottom

3. Choose your nearest metro area or enter your zip code

4. Toggle to view the schedule for the current day

The app schedule is laid out in an easy-to-scan channel guide format spanning from the late afternoon through late night. You can quickly see which classic sitcom, drama, western or variety show is coming up when.

Check Your On-Screen Cable TV Guide

If you have MeTV as part of your cable TV package, then finding tonight’s schedule is as simple as turning on your television. Most cable providers offer an on-screen channel guide that shows upcoming programs on each available station.

To use your on-screen guide:

1. Turn on your TV

2. Access the on-screen guide (usually by pressing the guide button on your remote)

3. Scroll through the guide until you land on the MeTV channel

4. View program listings for the current day and time

This offers the quickest route if you’re already watching TV and want to know what retro hits are coming up next on MeTV’s schedule.

Use Online & Print TV Listings

There are also many online and print TV guide sources that compile local listings for major networks, including specialty channels like MeTV.

Sites like TV Guide and TV.com offer searchable databases of television schedules across markets nationwide. Most newspapers also still run daily or weekly TV listing grids with channel and time details on shows airing in your area.

To use these listings to find MeTV’s schedule:

1. Go to TVGuide.com, TV.com or your local paper’s TV section

2. Search to find MeTV’s channel number in your area

3. View program listings for that channel on the current date

This offers a handy way to scan ahead and see not only tonight’s lineup, but also what beloved classics MeTV has in store over the next week or two.

Set Reminders for Your Favorite Shows

To take your MeTV viewership to the next level, set reminders for can’t miss episodes coming up in the schedule. Most cable boxes as well as the MeTV app allow you to set alerts for specific programs on your favorites list.

Here’s how to set reminders on some popular platforms:

MeTV App for iOS/Android:
– Tap the heart icon to add a show as a favorite
– Enable notifications for favorites in your device’s notification settings

Comcast Xfinity X1:
– Say “Set a reminder for [show] on MeTV” into your voice remote
– Reminders will appear before shows air

Spectrum App:
– Select a future show in the TV guide schedule
– Choose “Remind” from the episode details screen

With alerts enabled, you’ll never risk forgetting about an Abbott and Costello movie night or Three’s Company marathon again!

Stay Social

Finally, an easy way to stay on top of MeTV’s programming is by following their official social media channels.

MeTV maintains active accounts on platforms like Facebook, Twitter, and Instagram. These accounts post daily alerts counting down to fan favorite episodes and events coming up on the evening schedule.

For example, their Facebook may advertise a late-night monster movie airing tonight or a daytime Lucy-Desi Comedy Hour marathon happening right now.

By liking or following MeTV’s social pages, these schedule teasers will appear right in your main feeds. It makes staying in-the-know on their roster of classic hits effortless.

Tonight’s Schedule at a Glance

Thanks to MeTV’s far-reaching digital presence across web, mobile, and social platforms – more options than ever exist to lock in your viewing plans for tonight’s classic TV schedule.

So whether an early evening dose of The Andy Griffith Show or a late night Three Stooges romp is on your agenda, use any of the handy methods above to guarantee you know what’s playing on MeTV tonight!

The post How To Know Metv Schedule Tonight appeared first on Stream TV Better.